volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Accessory Electronic Module Tailored Reversing Warning System|Page 14414 > < Accessory Electronic Module Tailored Reversing Warning System|Page 14412
Page 1
background image

Parking Assist Distance Sensor: Service and Repair
Reverse Warning System

Reverse Warning System 

NOTE:  During installation the underlay must be kept at a temperature of at least +15 degree C (60 degree F).

-

Turn the ignition key to position 0

-

Remove the ignition key from the ignition lock. (Does not apply to cars with automatic gearboxes.)

-

Clean the bumper. Use a mild soap solution.

NOTE:  Wait at least five minutes before disassembling the connectors or removing other electrical equipment.

-

Detach the cargo compartment carpet at the rear edge (turn the two handles (1) a quarter turn).

-

Fold up the front edge of the cargo compartment carpet. Fold the front half back over the rear half of the cargo compartment carpet.

-

Slide the entire cargo compartment carpet forward slightly. Twist slightly to remove the cargo compartment carpet through the tailgate opening

-

Remove the cargo compartment carpet.

-

Press the centres of the clips until a click is heard. Remove the clips

-

Remove the plastic nut

-

Repeat the operation on the other side.

Accessory Electronic Module Tailored Reversing Warning System|Page 14414 > < Accessory Electronic Module Tailored Reversing Warning System|Page 14412