volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bushing Front Sub-Frame, Replacing|Page 16032 > < Bushing Front Sub-Frame, Replacing|Page 16030
Page 9
background image

-

Remove the hose for the EVAP canister.

-

Remove the fuel line for the engine block heater (if applicable).

Lowering the sub-frame 

-

Remove and hang the engine block heater (if applicable) on the left front mounting for the sub-frame.

-

Remove the fuel line for the engine block heater (if applicable) on the sub-frame from the snap fasteners.

-

Position a lifting table under the sub-frame.

-

Apply the lifting table so that the load is taken off the sub-frame screws.

-

Remove the sub-frame screws together with the accompanying brackets and washers.

-

Carefully lower the sub-frame approximately 50 mm.

NOTE:  Ensure that the steering gear screws are released from the sub-frame.

Bushing Front Sub-Frame, Replacing|Page 16032 > < Bushing Front Sub-Frame, Replacing|Page 16030