S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Remove the bracket for the heated oxygen sensor (HO2S) from the sub-frame
-
Lower the sub-frame a further 40 mm.
Pressing out the bushings
-
Install the hydraulic tool and press sleeve as shown in the above figure.
-
Press the bushings out of the sub-frame, see the above figure.
NOTE: It is arbitrary which of tools 999 5575, 999 5576 and 951 2564 is used.
Installing the bracket for the heated oxygen sensor (HO2S)
