S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Remove:
-
the 1 screw for the shaft
-
the 1 nut for the electric motor.
Pull out the shaft so that the electric motor is released.
Remove:
-
the spring between the cushion and the electric motor
-
the 3 tie straps
-
the connector under the seat.
Hint: Note the routing of the wiring to make it easier to reinstall.
Install the electric motor for the backrest cushion
Note! For tightening torques, see relevant specfications.
Install:
-
the electric motor. Press the shaft through the motor to secure it
-
the 1 M6 screw for the electric motor. Tighten
-
the 1 M6 screw for the shaft. Tighten
-
the spring.
Route the wiring.
Connect the connector.
Pull down upholstery.
Install:
-
the 4 half moon clips. Use special tool 115 8962 CRIMP PLIERS See: Tools and Equipment/115 8962 Crimp Pliers
-
the 3 tie straps
-
the 5 half moon clips. Use special tool 115 8962 CRIMP PLIERS See: Tools and Equipment/115 8962 Crimp Pliers
-
the front seat.
Front Height Adjustment Motor
The motor for front height adjustment