S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Lubricate and install the new screws. Tighten in two stages
1
20 Nm
2
Angle-tighten 90°
Check that the connecting rod can be moved laterally
The crankshaft must not be rotated before the connecting rod cap has been tightened
11
Installing the cylinder head
Install the cylinder head, see VADIS:
Repair and Installation
Function group 21
Replacing the cylinder head/gasket.
12
Installing the oil sump
Install the oil sump, see VADIS;
Repair and Installation
Function group 21
Oil sump, replace
S80 6 cyl. automatic:
After cylinder head has been installed reinstall the lifting hook 999 5460 and lifting yoke 999 5716. Remove the screws on the left-hand side of the
sub-frame.
Lower the left-hand side of the sub-frame.
13
Topping up
Top up the oil and coolant.
Run the engine to operating temperature.
Check coolant and oil levels.