S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Install:
-
the drive plate
-
the screw, 1 pc., using a counterhold: 999 7193 Counterhold See: Tools and Equipment/999 7193 Counterhold and tighten with 13 Nm.
Checking the clearance
Check the clearance between the turning plate and the pulley using a feeler gauge.
The clearance shall be 0.3-0.5 mm.
0.3 mm clearance all the way round
0.6 mm shall not go in anywhere.
If the clearance is not within given values, replace shims.
The following dimensions are available:
0.2 mm
0.3 mm
1.0 mm.
Installing the air conditioning (A/C) compressor
