S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Connect the connector (1) to the stop lamp.
Tape (2) stop lamp wiring to the headlining so that they cannot make a noise.
Install foam rubber (3), just behind the hole for the rear interior lighting. Use contact adhesive, P/N 1161434, if there is too little adhesive left on the
foam rubber for it to stick to the headlining.
Install clip (4) in the headlining by pressing straight up and twisting a quarter turn.
Install the interior lighting (5) by pressing straight up.
Function test
Checking the stop lamp
Check the function of the stop lamp with the low beam on and the turn signal lamp activated.
Check the function of the interior lighting.