volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cooling System - Draining, Charging And Bleeding|Page 2406 > < Cooling System - Draining, Charging And Bleeding
Page 1
background image

Coolant: Service and Repair
Checking / Changing Coolant

Changing coolant:

Normally, the coolant does not need to be changed. If the system most be drained, consult your Volvo retailer.

NOTE: Do not top off with water only. This reduces the rust-protective and antifreeze qualities of the coolant and has a lower boiling point. It can also
cause damage to the cooling system if it should freeze. Top off with Volvo Genuine Coolant/Antifreeze only (a 50/50 mix of water and antifreeze).

CAUTION:

The cooling system must always be kept filled to the correct level. If it is not kept filled, there can be high local temperatures in the engine which could
result in damage. Different types of antifreeze/coolant may not be mixed.

Check coolant regularly!

WARNING!

Never remove the radiator cap while the engine is warm. Wait until the car cools.

If it is necessary to top up the coolant when the engine is warm, unscrew the expansion tank cap slowly so that the overpressure dissipates.

Cooling System - Draining, Charging And Bleeding|Page 2406 > < Cooling System - Draining, Charging And Bleeding