S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Install
-
the new sensor. Tighten to 10 Nm
-
the cable in the bracket on the cylinder block (left front)
-
the cable in the hooks on the bracket (left front of the engine)
Connect the connector.
-
the hoses in the bracket (at the left of the engine)
-
the hose bracket (at the left front of the engine)
-
the hoses in the bracket (at the left front of the engine)
-
the tie straps on the bracket (at the left of the engine)
-
the pipe between the air cleaner (ACL) and the turbocharger (TC)
-
the engine stabilizer brace between the suspension turrets. Tighten the screws to the bodywork to50 Nm. Tighten the screw for the mounting for
the engine stabilizer brace to80 Nm
-
the cable clamp.