S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
999 7033 Sleeve See: Tools and Equipment/999 7033 Sleeve
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7037 Connecting rod M14X400 See: Tools and Equipment/999 7037 Connecting Rod M14X400
999 7038 Drift See: Tools and Equipment/999 7038 Drift
999 7039 Connecting rod M16X360 See: Tools and Equipment/999 7039 Connecting Rod M16X360
999 7040 Drift See: Tools and Equipment/999 7040 Drift
999 7041 Screw MC6S M12X70 See: Tools and Equipment/999 7041 Screw MC6S M12X70
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Preparations
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
Remove: (not AWD)
-
the cargo compartment carpet
-
the seal above the shock absorber mounting on both sides.
Remove the two screws for the spring seat mounting on both sides.
Raise the car.
Note! Lift the sill edges so that the rear axle is free.
Remove:
-
the exhaust system from the three-way catalytic converter (TWC) and backward. See Exhaust system, replacing See: Engine, Cooling and
Exhaust/Exhaust System/Service and Repair
-
the propeller shaft from the viscous coupling.
Disconnecting the components for the final drive
-
Disconnect the connector from the control module for Active on Demand Coupling
-
Detach the cable harness from the sub-frame.
Removal