S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
-
Clean the hole for the bushing in the sub-frame.
-
Press out the bushing by hand.
CAUTION: The markings on the bushing and sub-frame must be positioned opposite each other.
Marking the left-hand rear bushing
NOTE: The left-hand rear bushing on the sub-frame is a different version to the other three bushings. The hole in the center of the bushing is oval. The
oval must be positioned lengthways to the car, as shown in the above figure.
CAUTION: The markings on the bushing and sub-frame must be positioned opposite each other.
Pressing in the bushings
