S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
Rear Knuckle Alignment Link: Service and Repair
Bushing Outer Tie Rod, Replacing
Bushing outer tie rod, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12
Removal
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
-
Remove the screw from the tie rod mounting
-
Turn the tie rod upwards.
Removing the bushing
-
Install the hydraulic cylinder
-
Use tool 951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder with 999 7054 Adapter incl. 2x MC6C
M6X12 See: Tools and Equipment/999 7054 Adapter Incl. 2X MC6C M6X12 , 999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve ,
999 7036 Drift See: Tools and Equipment/999 7036 Drift and 999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034
Connecting Rod M12X400
-
Pull the bushing out.
Installation
Installing the bushing