volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cowl Moulding / Trim > < Badge Rear, Replacing|Page 20791
Page 2
background image

Use the following measurements:
M1 = 67±1 mm, from the front door edge
M2 = 35±1 mm, from the lower edge of the trim molding
Check that the edge of the decal is in contact with the surface and properly secured.

Note! To ensure optimal adhesion, do not wash the car for 72 hours.

Cowl Moulding / Trim > < Badge Rear, Replacing|Page 20791