volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removal and Replacement|Page 21686 > < Removal and Replacement|Page 21684
Page 10
background image

Hint: If the distance between the two rails differs, secure the short mechanical cable in a power screwdriver and screw until the rails are equal.

Install:

-

the connector

-

the electric motor and the mechanical cables

-

the 2 M5 screws

-

the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat/Front Seat, Driver's Seat/Front Seat,
Replacing.

Front Height Adjustment Motor

The motor for front height adjustment

Replacing the motor for height adjustment

Remove:

-

the seat from the car and the bracket. See Bracket (cross stay)  

-

the connectors. See Connector .

-

the two screws.

Install:

In reverse order.

Front-Rear Adjustment Motor

Front-rear adjustment motor

Removing the front-rear adjustment motor

Removal and Replacement|Page 21686 > < Removal and Replacement|Page 21684