S70 L5-2.4L VIN 55 B5254S (1998)
Install hose to fasteners on the side of the tank.
Install hose to fasteners on filler pipe.
Install cable tie.
Caution!
Ensure that all wires are properly inserted through the access hole in the body, and that no wires are pinched and/or chafing.
Raise the tank and torque screws to tank straps to.
Tighten to 25 Nm (18 ft.lb)
22
Installing EVAP hose
Install EVAP hose (1) to canister.
Carefully pull lightly on hose to ensure that coupling is locked on fitting.
23
5-door car
Lower the car.
Connect all connectors that are in the bracket.