S70 L5-2.4L VIN 61 B5244S (2000)
^
Check that brake disc and rim contact surfaces are clean
^
Grease hub center guide for rim with anti-rust agent 116 1038-3.
^
Install wheel.
^
Install bolts hand tight. Then tighten them in star pattern to 110 Nm (80 ft. lbs.). If tightening with nut runner, use torque socket 115 8147.
Note: Tightening bolts in star pattern to specific torque settings is important to prevent stresses in the brake disc.
Operational checks
^
Read off any DTCs posted in control module and erase them.
^
Quit DTM by switching off ignition.
^
Test-drive car and check that ABS warning indicator goes out.
^
Read off DTCs and check that DTC 1-1-1 appears.
^
Quit DTM by switching off ignition.