volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bleeding Brakes Without Bleeding Unit|Page 5899 > < Bleeding Brakes Without Bleeding Unit
Page 2
background image

Bleeding other wheels 

Continue bleeding as per in the following order:
^

RH front wheel.

^

LH rear wheel.

^

RH rear wheel.

Check 

^

Check if there is any air left in the system by depressing the brake pedal sharply (a braking power equivalent to 200 Nm). With the engine off
and the brake pedal depressed 3-4 times, the pedal travel should not exceed 40 mm (1.6 inch) 

If pedal travel is longer than 40 mm (1.6 inch) bleed again and then re-check pedal travel.
^

Check that brake fluid level is not over the MAX mark.

Bleeding Brakes Without Bleeding Unit|Page 5899 > < Bleeding Brakes Without Bleeding Unit