S70 L5-2.4L VIN 61 B5244S (2000)
-
Clean the terminals for the brake pipes at the master cylinder and ABS unit
-
Place paper under the master cylinder to avoid brake fluid spillage
-
Remove the brake pipes from the master cylinder and ABS unit. Install plugs.
Installation
Installing the brake pipes
Tighten the brake pipes. Tighten to 17 Nm.
Installing the integrated relay / fusebox on the bracket
-
Align the box (1) in the bracket (2). Push the box to the side. Release the box so that it aligns in the bracket (3)
-
Tighten the screws. Tighten to 10 Nm
-
Reinstall the positive cables and the nut for the relay box. Tighten to 25 Nm.