volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < A/T - Hard Lockup Engagement/Disengagement|Page 2752
Page 3
background image

Install the upper and lower radiator hoses.
Install the engine Cooling Fan (FC).
Raise the car and tighten the lower screws holding the AC condenser to the radiator.
Reinstall the splash guards.

Top up coolant 

Fill the cooling system through expansion tank.
The total coolant capacity is approximately 7.2 liters (1.9 US gallons). 
Run the engine to operating temperature and top up coolant if necessary.
Check for leaks.

Relays and Modules - Cooling System > < A/T - Hard Lockup Engagement/Disengagement|Page 2752