S70 L5-2.4L VIN 61 B5244S (2000)
Install the belt in the following order:
-
1. crankshaft.
-
2. idler pulley.
-
3. intake camshaft pulley.
-
4. exhaust camshaft pulley.
-
5. water pump.
-
6. belt tensioner.
Tension the timing belt
This adjustment is to be made with a cold engine. A suitable temperature is approximately 20°C / 68°F.
At a higher temperature, for example with a warm engine or a higher ambient temperature, the needle is further to the right.
The illustration shows the indicator position when adjusting the camshaft belt tensioner at different engine temperatures.
Tension the timing belt as follows
-
Carefully turn the crankshaft clockwise until the camshaft belt is tensioned.
The belt should be tight between intake camshaft pulley, the idler pulley and the crankshaft.
-
Hold the belt tensioner center screw secure and turn the belt tensioner eccentric counter-clockwise until the tensioner indicator passes the marked
position.
Then turn the eccentric back so that the indicator reaches the marked position in the center of the window.
