volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

With VVT|Page 2071 > < With VVT|Page 2069
Page 9
background image

-

the trigger wheel. Tighten to 17 Nm

-

the camshaft position (CMP) sensor housing and a new cover. Tighten to 17 Nm

-

the torque rod bracket. Tighten to 50 Nm

-

the cover over the ignition coils

-

air cleaner (ACL) cover

-

the inlet hose between the air cleaner (ACL) and throttle body (TB)

-

the crankcase ventilation hose on the inlet hose

Check the engine compartment. Wipe the engine compartment clean.

Checking the engine

Test drive the car to check the function of the engine.

With VVT|Page 2071 > < With VVT|Page 2069