S70 L5-2.4L VIN 61 B5244S (2000)
Engine Oil Filler / Breather Cap: All Technical Service Bulletins
Engine Oil Filler Grate - Works Loose
Section
2
Group
21
No.
0029
Year
00
Month
03
S7O/V7O/V7O XC/C7O
2000 Partly
Campaign No. 98
Engine oil filler grate, inspection
Background
An oil filler grate is located in the engine oil filler neck of certain model year 2000 vehicles. In rare instances this grate may become loose. The
following inspection must be performed to check the oil filler grate.
Engine oil filler grate, inspection
Inspection of Oil filler grate
Remove Oil Filler Cap
1
Inspect : look to see if oil filler grate is visible.
If VISIBLE: proceed to next step.
If NOT visible - take a magnet and insert it into the filler neck. Move magnet in all directions including passing the magnet over oil puddles. Remove
magnet and check magnet for metal shavings.
If the oil filler grate is not visible and metal shavings are present contact your Regional FTS or the Technical Hot-line.
If the oil filler grate is not visible, and no metal shavings are present inspection completed. Using tire chalk, place an X across the top of the oil filler
cap.