S70 L5-2.4L VIN 61 B5244S (2000)
Remove
-
engine Cooling Fan (FC) and intake manifold.
-
upper radiator hose from thermostat housing
-
camshaft pulleys, use counterhold 999 5199, mark up pulleys (intake/exhaust)
-
inner timing cover screw
Remove rear components:
-
Air Cleaner (ACL) housing with hoses
-
Camshaft Position (CMP) sensor with trigger wheel
-
distributor cap with cables and rotor
-
torque control arm with brackets
Remove upper half of cylinder head
Install tool 999 5453 (4-valve engine) or 999 5508(2-valve engine) to fix the camshafts at the front edge.
Install tool 999 5454 to the camshaft housing cover allowing a few mm play.
Slacken off the screws (from outside and in) from the upper half, remove all screws.
Remove the camshaft cover at the stop lugs with tool 999 5670. Start with cylinder 1 and work alternately backward.
Open and remove the tools 999 5454 step for step so that parallel movement is ensured when removing the camshaft housing cover.
Mark up and remove camshafts.
Remove cylinder head
