S70 L5-2.4L VIN 61 B5244S (2000)
-
the right front wheel.
-
the nuts for the cover in the fender liner.
Install the upper camshaft belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
Remove the upper timing belt cover.
Removing the camshaft belt
Slacken off the belt tensioner.
Slacken off the belt tensioner center screw slightly.
Hold the center screw still and turn the tensioner eccentric clockwise with a 6 mm (15/64") Allen key to "10 o'clock".
Remove the camshaft belt from the belt tensioner, camshaft pulley and idler pulley.
Removing the timing gear pulley with the variable Valve Timing (VVT) unit
Use camshaft adjustment tool:
-
Install camshaft adjustment tool 999 5452 at the rear edge of the camshafts.
Remove:
-
the plug at the front edge of the variable valve timing unit (TORX 55)
-
the center screw in the variable valve timing unit (TORX 55). Carefully pull out the timing gear pulley with the VVT unit
-
timing gear pulley without VVT
-
the screws and the timing gear pulley.
Replace the camshaft seal
