S70 L5-2.4L VIN 61 B5244S (2000)
Timing Belt: Service and Repair
Replacement, With Variable Valve Timing
REPLACING TIMING BELT
Remove components
Caution!
Remove the ignition key.
Remove
-
the cross stay between the suspension turrets
-
the upper camshaft belt cover
-
the servo reservoir and expansion tank
Lift them up and place them on top of the engine
Warning!
Ensure that no power steering fluid is spilled. It is extremely flammable!
-
the auxiliaries belt
-
the front timing cover
Position engine according to marking
Raise the car.
-
Remove right front wheel.
-
Remove nut from fender liner cover.
-
Place upper camshaft belt cover.
-
Turn crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
-
Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond. The markings are illustrated.
-
Remove upper camshaft belt cover.