S70 L5-2.4L VIN 61 B5244S (2000)
Exhaust Manifold: Service and Repair
Exhaust Manifold/Gasket, Replacing
Special Tools: 999 5543
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Preparation
Remove
-
the right front wheel
-
the splash guard under the engine
-
the right drive shaft.
Remove
-
the heat deflector plate above the coolant pipes and hoses for the oil cooler
-
the support bracket between the cylinder block and the manifold and three-way catalytic converter (TWC)
-
the nuts where the front exhaust pipe and three-way catalytic converter (TWC) join.
Remove the brake pipe from the holders at the front SIPS member.
Remove the screws holding the SIPS member to the bodywork.
Unhook the rubber mountings for the rear exhaust system from the holders.
Pull the exhaust system back so that it releases from the flange at the manifold and three-way catalytic converter (TWC). Put it to one side.
Remove
