volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing/Adjusting Control Cable & Control Panel|Page 7409 > < Replacing/Adjusting Control Cable & Control Panel|Page 7407
Page 1
background image

Control Assembly: Service and Repair
Replacing Bulb In Control Assembly

 AI7 Replacing Bulb in the Climate Control Unit Panel (Without ECC):

NOTE:  For type of bulb, See: Lighting and Horns/Specifications

-

Ignition off.

-

Slacken off the outer knobs.

-

Remove the two screws holding the front panel.

-

Pull out the front panel and remove the bulb holder by twisting it gently. Use a radio screwdriver. There are three bulbs.

-

Replace bulb(s).

-

Assemble in reverse order.

CAUTION:  Do not tighten screws too hard.

-

Check that the bulbs light.

Replacing/Adjusting Control Cable & Control Panel|Page 7409 > < Replacing/Adjusting Control Cable & Control Panel|Page 7407