S70 L5-2.4L VIN 61 B5244S (2000)
Check the new stop (brake) light switch to ensure:
^
that the white locking sleeve is pulled out towards the tip of the stop (brake) light switch as far as it will go.
^
that the catches are not in contact with the white locking sleeve.
Installing
Note: Brake pedal must be depressed.
^
Connect the connector.
^
Install stop (brake) light switch. Check location of switch in bracket.
^
Press stop (brake) light switch into place. There is a distinct click when the catches engage with the bracket.
^
Remove pedal jack.