S70 L5-2.4L VIN 61 B5244S (2000)
Connect bleeding unit to brake fluid reservoir. Follow manufacturer's instructions for connecting and using bleeding unit.
Pressurize the brake system. Check the brake fluid reservoir connector.
Raise the car and remove the wheels
Bleeding left front wheel (right wheel on right-hand drive)
Remove the protective cap from the bleed nipple. Connect the hose from the collection bottle.
Open the bleed nipple. Close it when there are no more air bubbles in the fluid coming out of the hose.
Tighten the bleed nipple.
Remove the hose from the bleed nipple. Reinstall the protective cap.
Bleeding other wheels
Continue to bleed the other wheels as for the left front wheel
Check for leakage from the bleed nipples.
Depressurize the brake system
Close the cock on the pressure line. Open a nipple and close it again.
Checking for air in the brake system and for brake fluid leakage
See Brake pipe master cylinder / ABS unit, replacing
