S70 L5-2.4L VIN 61 B5244S (2000)
^
Remove protective cap from bleed nipple.
^
Connect drain bottle hose.
^
Open nipple approximately one turn.
^
Push brake caliper pistons to bottom of caliper. Use tool 999 2809 (x 2).Leave tools on calipers.
^
Pressurize braking system and bleeding unit.
^
Drain off 2-3 dl brake fluid
^
Close bleed nipple and remove hose.
^
Re-fit protective cap.
^
Depressurize braking system using bleeding unit.
^
Remove tools from brake calipers.
Installing rear brake pad
^
Install brake pad.
^
Depress brake pedal a few times.
Replacing brake fluid RH, rear
^
Repeat steps (LL6-8), on RH rear brake caliper.
Removing bleeding unit
Remove:
^
Bleeding unit connection from brake fluid reservoir.
Finishing work
^
Depress brake pedal repeatedly until brake pistons return to normal position.
^
Check brake fluid level and install reservoir cap.
Clean up any brake fluid spillage with lukewarm water and car-wash shampoo.
Installing wheels