S70 L5-2.4L VIN 61 B5244S (2000)
Remove:
^
Hose from bleed nipple and re-install protective cap.
Bleeding other wheels
Continue bleeding as per (LK4)-(LK5) in the following order:
^
RH front wheel
^
LH rear wheel
^
RH rear wheel
Remove:
^
Bleeding unit connector from brake fluid reservoir.
Check
^
Check if there is any air left in the system by depressing the brake pedal as if braking sharply (a braking power equivalent to 200 N). With the
engine off and the brake pedal depressed 3-4 times, the pedal travel should not exceed 40 mm (1.6 ins).
If pedal travel exceeds 40 mm (1.6 ins), bleed again and then re-check pedal travel.
Check that brake fluid level is not over the MAX mark.
Bleeding brake system without a bleeding unit
Note: Bleeding breaking system with ABS takes longer than bleeding conventional braking systems.
Guidelines for bleeding
