S70 L5-2.4L VIN 61 B5244S (2000)
Position gasket on thermostat housing correctly and install thermostat housing using two of the screws.
Position thermostat housing correctly and tighten the four screws.
Position wire channel correctly and position wire in channel.
Tighten screw on wire channel.
Connect the connector.
Install outer/upper timing-gear casing.
Install coolant reservoir.
Install oil reservoir for servo pump.
Follow-on work, 6-cylinder
Fill up coolant.
Warm the engine until the thermostat opens.
Switch engine oft and check the level. Re-fill if necessary.
Check for leaks.
Check in VADIS vehicle communication (read-out of parameter values), for current engine system, that the engine temperature shown appears correct.
Engine temperature sensor, 5-cylinder
Install in reverse order.
Follow-on work, 5-cylinder
Fill up coolant.
Warm the engine until the thermostat opens.
Switch engine off and check the level. Re-fill if necessary.
Check for leaks.
Check in VADIS vehicle communication (read-out of parameter values), for current engine system, that the engine temperature shown appears correct.