S70 L5-2.4L VIN 61 B5244S (2000)
-
At higher temperatures (with the engine at operating temperature or a high ambient temperature for example) the indicator is further to the right.
The illustration shows the position of the indicator when aligning the timing belt tensioner at different engine temperatures.
Tension the timing belt as follows:
-
Fix the belt tensioner center screw in position and turn the belt tensioner eccentric counter-clockwise until the tensioner indicator passes the
marked position.
-
Then turn the eccentric back so that indicator reaches the marked position in relation to actual temperature.
-
At the same time, ensure that the center screw remains fixed. At 20° C/68° F, the indicator should be centered in the window.
-
If the indicator is not in the right position, the adjustment must be repeated.
Note: The variable valve timing unit must not be released from the limit position until after the timing gear pulleys have been tightened.
-
Tighten the screws (2) on the timing gear pulley for the exhaust camshaft to 10 Nm.
-
Tighten the screws on the intake camshaft to 20 Nm.
Remove: The camshaft adjustment tools 999 5452. The crankshaft stop 999 5451.
-
Install the plug with a new sealing washer. Tighten to 40 Nm.
