S70 L5-2.4L VIN 61 B5244S (2000)
Coolant Temperature Sensor/Switch (For Computer): Description and Operation
Engine coolant temperature (ECT) sensor
The engine coolant temperature (ECT) sensor checks the temperature of the engine coolant. The temperature of the engine coolant is required so that
the engine control module (ECM) can regulate:
the injection period
the idle speed
the engine cooling fan (FC)
the ignition advance
engagement and disengagement of the A/C compressor
diagnostic functions.
The sensor is a negative temperature coefficient (NTC) type which is supplied with power from the control module (signal) and is grounded in the
control module.
The resistance in the sensor changes according to the temperature of the engine coolant. This provides the control module with a signal of between
0.1-4.9 V. The lower the temperature the higher the voltage (high resistance). A high temperature results in low voltage (low resistance).
The engine coolant temperature (ECT) sensor is located beside the thermostat.
The engine control module (ECM) can diagnose the engine coolant temperature (ECT) sensor. The sensor value can be read off using VADIS.
