S70 L5-2.4L VIN 61 B5244S (2000)
Disconnecting the fuse holder
5
Remove the relay and fuse holder clip mounting in the fuse box.
Push up the holders to access the rubber grommet on the under side of the fuse box.
Removing the B+ cable
6
Remove:
-
the protective tube (1) around the B+ cable (2) between the cable duct and the fuse box.
-
any tape around the cable harness. Cut off the front cable terminal on the B+ cable. Pull up the cable through the rubber grommet.
Installing the new B+ cable
7
Insert the new cable (1) through the rubber grommet. Install the cable in the fuse box without tightening it.
Installing the fuse holders
8
Install the holders in the fuse box.
Check that the wiring underneath the holders is not trapped.
Install:
