S70 L5-2.4L VIN 61 B5244S (2000)
Installing a new steering wheel lock
-
Position the new steering wheel lock.
-
Install new security screws (1).
-
Install connector for ignition lock.
-
Install cable for steering wheel lock.
-
Verify steering wheel lock function.
Install:
-
Note! Do not forget to connect the disassembled connector.
-
Caution! Ensure that the boot for the windshield wiper lever is in place.
-
Caution! Ensure that no wiring is trapped when the steering column covers are installed.
-
the holder for the steering lock lighting. Use a new bulb.
-
contact reel.
-
the lever for the windshield wipers.
-
the lever for the turn signal lamps.
-
the lower cover for the steering column. Use a Torx TX 25 tool.
-
the upper cover for the steering column. Use a long Torx TX 15 tool.
-
the steering wheel. Tighten to 40 ft.lb.
Install the airbag module. Tighten to 10 ft.lb.
Final adjustments
-
Adjust the steering wheel setting.
-
Fold up the adjustment lever.
-
Connect the battery negative lead.
-
Program the radio if applicable.