S70 L5-2.4L VIN 61 B5244S (2000)
Locate the spring end in the trailing arm stamped section and locate the mounting washer guide pin in the hole on the trailing aim. Install a new nut on
the mounting washer. Tighten to 40 Nm (29.5 ft. lbs.).
Position a mobile jack under trailing arm and lift up.
Install shock absorber on lower mounting
Caution Check that the spring is correctly positioned on the upper spring seat.
Tighten the shock absorber nuts to 80 Nm (59.0 ft. lbs.).
Tighten upper shock absorber mounting screws to 25 Nm (18.44 ft. lbs.)
Reinstall:
-
front edge of panels with clips.
-
backrest catches. Use thread sealant. Tighten to 20 Nm (14.75 ft. lbs.)
-
cover plate and cargo compartment carpet.
