volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cylinder Head Gasket|Service and Repair|Page 2478 > < Engine - Rear Main Seal Replacement|Page 2474
Page 1
background image

Cylinder Head Gasket: Service and Repair

Special Tools

951 2050
999 5199
999 5449
999 5451
999 5452
999 5453
999 5454
999 5509
999 5533
999 5670

Drain coolant and remove front exhaust pipe 

Disconnect battery negative lead.
Remove expansion tank cap.
Remove splash guard under engine.
Open nipples on the engine and radiator. Use hoses to lead off coolant.
Close the nipples.
Remove manifold/headpipe nuts.

Remove exhaust manifold and fuel rail 

Remove 
-

exhaust manifold, according to operation, refer to Exhaust System.

Check/replacing exhaust system.
-

belt transmission, according to operation Replacing timing belt, refer to Timing Components.

Lift up and put fuel rail with injectors to one side. Use holder 999 5533 for injectors.
Remove the two ground strips from the engine.

Caution:  Take care not to damage injector nozzles and fuel needles.

Cylinder Head Gasket|Service and Repair|Page 2478 > < Engine - Rear Main Seal Replacement|Page 2474