S70 GLT L5-2.4L Turbo VIN 56 B5244T (2000)
Example.
The measurement at A must be 3.6 ± 1 m greater than at a.
Adjusting toe-in
Adjustment is made with the tie rods after loosening the lock nuts. Longer rods give a greater angle and vice versa. See the table above for the correct
values.
Note! The lengths of the tie rods must not vary between themselves by more than 2 mm. Measure between the lock nut and the edge of thread. Treat
the tied rod threads using suitable rustproofing agent after they been tightened.
Steering wheel position
Minor deviation, adjust at the same time as the toe-in adjustment a
For major steering wheel deviation, refer to Steering, Steering Column, Service and Repair.