S70 GLT L5-2.4L Turbo VIN 56 B5244T (2000)
^
Remove brake pad brake caliper.
Replacing brake fluid LH rear
^
Remove protective cap from bleed nipple.
^
Connect drain bottle hose. Open nipple approximately one turn.
^
Push brake caliper pistons right down into caliper, using tools 999 2809(x 2). Leave tools on calipers.
^
Push brake pedal right down and hold it there for approximately 2 seconds before releasing it. Repeat this until 2-3 dl brake fluid has drained off
^
Close bleed nipple while holding brake pedal right down.
^
Remove hose and refit protective cap.
Remove:
^
Remove tools from brake caliper.
Removing brake pad LH rear
^
Install brake pad as per Replacement of components.
^
Depress brake pedal a few times.
Replacing brake fluid Rid, rear
Repeat steps Brake fluid, replacement with bleeding unit.
Finishing work
^
Depress brake pedal repeatedly until brake pistons return to normal position.
^
Check brake fluid level and install reservoir cap.