volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Procedure (Driver's)|Page 6863 > < Replacement Procedure (Driver's)|Page 6861
Page 7
background image

unlocked and the steering wheel can be turned.

CDA21. Connecting the special tool

Connect the special tool 998 8695.

CDA22. Connecting the battery negative lead

CDA23. Alignment of front wheels

Drive the car slowly in a straight line forwards or backwards on a level circuit so that the wheels are directly in line with the car lengthways.

Carefully check that the steering wheel can be turned a full turn in both directions and make sure that all electrical functions on the steering column
operate correctly.

WARNING!  Do not drive the car further than necessary when aligning the front wheels. The steering wheel is not secured and the steering wheel
air bag module is removed.

If the steering wheel is Incorrectly aligned: 
See CDA10 - CDA15, CDA16 - CDA23.

If some electrical functions do not operate:
See CDA10 - CDA15, CDA16 - CDA23.

CDA24. Tightening the retaining screw in the centre of the steering wheel.

Replacement Procedure (Driver's)|Page 6863 > < Replacement Procedure (Driver's)|Page 6861