S70 GLT L5-2.4L Turbo VIN 56 B5254T (1998)
Remove SIPS bag cushion module
Remove cushion module from seat back frame, following these steps:
-
Remove two Torx-25 screws.
-
Remove cushion module
Remove sensor unit
Remove sensor unit from forward SIPS tube, following these steps:
-
Remove Torx-25 screw.
-
Remove pressure plate.
-
Remove sensor unit.
-
Leave clips in SIPS tube sensor housing.
Remove SIPS bag from seat
-
Remove entire SIPS bag (i.e. sensor unit, firing circuit and cushion module) from seat.
Installation
Install SIPS bag in seat