S70 T5 L5-2.3L Turbo VIN 53 B5234T3 (1998)
Headlamp Height Control Motor: Service and Repair
CF1 Removing:
-
Ignition off.
Remove:
-
headlamp height adjustment motor connectors.
-
headlamp connector.
-
motor. Turn a 1/4 turn, the motor has a bayonet connector.
-
Pull motor back to release the ball on the motor spindle from the mounting on the reflector.
CF2 Installing
-
Turn the adjustment screw on the motor clockwise until the motor spindle is extended to its maximum length. This makes installation easier.
-
Lubricate the ball on the motor spindle.
-
Open the inner headlamp bulb cover.
-
Hold the reflector while guiding the ball into the reflector mounting.
-
Turn the motor clockwise as far as it will go.
-
Connect connectors and test headlamp height adjustment motor function.
-
Carry out headlamp alignment, See: Adjustments