S70 T5 L5-2.3L Turbo VIN 53 B5234T3 (1998)
Ignition Lock Cable: Adjustments
1. Preparations
-
Remove:
Battery negative lead.
Center console as per steps 3 and 4 of Shift Cable A/T replacement. See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shift Linkage/Shift Cable/Service and Repair
2. Remove:
-
Steering column covers
-
Soundproofing panel and knee bolster underneath dashboard
-
Fold back carpet and remove side panel.
3. Disconnect cable from ignition switch
-
Move gear shift lever to position P.
-
Turn ignition key to position I or 11.
-
Depress cable end locking tabs in ignition switch and withdraw cable.
Basic Adjustment Of Cable
4. Move gear shift lever from P to another position.
-
Clearance between locking tabs at ignition switch end is approx. 7 mm (0.28 inch).
Adjust at the gear lever end.