S80 L6-2.9L VIN 92 B6294S2 (2004)
Checking connections, continued
4
Check that connector (4) is connected correctly to the rear windshield. Check that the AM cable positioned at the uppermost point is marked with a white
dash. Check that the text is pointing towards the rear windshield.
Check terminal (4), which is similar to a 9 Volt battery terminal. Check for oxidation.
Disconnect the connector. Check the mating surfaces. If the connecting sockets are deformed, adjust using pliers.
If the repair is unsuccessful, replace the antenna amplifier.
Checking the tinted film on the rear windshield
5
If tinted film is applied to the rear windshield, check the antenna wires for damage and adhesion.
Ask the customer if the application of tinted film affected AM waveband radio reception.
It may be necessary to remove the tinted film for the antenna to function properly.
On S80 cars with chassis numbers 000570-063999
6
Check the connector (1) under the rear seat at the C-post mounting.
Bend the coaxial cable on both sides of the connector
If no faults are found, continue to the next stage.
If a fault is found, carry out steps 10-13.
