S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Measure as illustrated and mark up for holes on the underneath of the glove compartment.
-
Drill out the holes. Use a -6 mm (15/64") drill bit.
-
Position the CD bracket in the glove compartment so that the guides are against the bottom of the glove compartment.
-
Mark the holes on the CD bracket using the drilled holes in the glove compartment as a guide.
-
Drill out the holes in the CD bracket. Use a -6 mm (15/64") drill bit.
-
Remove the CD bracket.
-
Drill out the holes in the glove compartment. Use a -6.5 mm (1/4") drill bit.
Applies to the S60, V70 (00-) and the S80
Illustration A
-
Measure and drill holes in the glove compartment. Use a -5 mm (13/64") drill bit.
Illustration B
-
Measure and drill the hole in the CD storage box. Use a -5 mm (13/64") drill bit.
Illustration C