S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Move the gear selector lever to its rearmost position
-
Pull the panel (1) and the boot backwards. Turn the panel as illustrated
-
Remove the screws (2) from the dashboard environment panel.
-
Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the centre console and the reverse of
the panel
-
Detach the dashboard environment panel by pulling it downwards while maintaining the same angle. Some force is required because the panel is
tightly installed
-
Disconnect the connectors on the reverse of the dashboard environment panel. Place the dashboard environment panel to one side.
Note! If any of the outer hooks break off, these must be repaired. The method for this can be found in the Workshop Manual in the
section about the dashboard.
-
Remove the screws (1) from the radio bracket
-
Pull out the bracket with the radio. Pull the lower corner while pressing downwards
-
Disconnect the connectors on the radio. Place the bracket and the radio to one side.
