S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Press in the catches on the rear brown connector in the fuse holder in the cargo compartment. Turn up the lock arm as far as possible. Pull out the
connector.
-
Carefully pull apart the sides of the holder for the connector at the ends so that the connector can pass by the catches
-
Pull the connector out.
-
Position the red/white (R/W) single cable with the larger cable terminal facing backwards along the cable. Insulate the cable. Secure the cable
using the foam tape from the kit. It must not come into contact with the chassis.
