S80 L6-2.9L VIN 92 B6294S2 (2004)
-
Lift the accessory electronic module out of the bracket.
-
Disconnect the large connector from the Accessory Electronic Module. First press in catch A. Pull the black locking handle B in the direction of
the arrow until a click is heard. Disconnect the connector
-
Disconnect the connector from the accessory electronic module.
Remove:
-
the black catch holding the black switch in place in the connector by pulling in the direction of the arrow
-
the black switch by inserting a pointed object into the hole in the other end. Press the switch out.