S80 L6-2.9L VIN 92 B6294S2 (2004)
Illustration C applies to the XC90
-
Remove the drainage hose (1) from the battery
-
Remove the rubber seal (2). The rubber seal will not be used again
-
Pull off the small narrow rubber strap on the new rubber seal
-
Thread the old drainage hose through the new rubber seal. Ensure that the hose is unimpeded and is not kinked.
Cable routing
-
Install the new holder for the connector
-
Unlock the red catches: Press the catches forward
-
Connect the blue (BL) cable to terminals 1, 5 or 12, depending on the desired function. Terminals: 1 = Charging; 5 = Fog tail lamp; 12 =
Reversing lamp
-
Return the catches to the locked position.
Note! If the "Charging" function is to be used, the existing cable terminal must be cut off and replaced with the cable terminal from the kit.
Applies to the S60
